Notes on Installing the Madge HP-UX 11.11 Token-Ring PCI Adapter Driver
=======================================================================

                                                                  April 2002
                                                                  ==========


Contents
--------

1. Adapters Supported
2. Installing the Package
3. Configuration and Unconfiguration of the driver
4. Removal of package

1. Adapters Supported
---------------------

This package supports the following Madge Token-Ring adapters:
   
    100/16/4
    Smart PCI MK4       part number 51-05
    Smart PCI MK4 Low Profile  part number 51-05

    16/4
    RapidFire 3140 V2   part number 3140 2010
    RapidFire 3140 V2  Low Profile  part number 31-04


2. Installing the Package
-------------------------

a) Log into your HP-UX system as "root".

b) Run the configure script which provides support for
   lanscan and landamin.

3. Configuration and Unconfiguration
------------------------------------
    
   a)Dynamic loading
     ---------------

     For loading the driver dynamically run the following commands in the token4 directory,

         1. kminstall -d token4
         2. kminstall -a token4
         3. kmsystem -c Y -l Y token4
         4. config -M token4 -u
         5. kmadmin -L token4 
         6. ioscan
         7. Assign the IP using ifconfig command

     For unloading the driver dynamically run the following commands in the bin directory,
 
         1. Bring the interface down with ifconfig command.
         2. kmadmin -U token4 (This will bring the driver down but the driver will be 
            configured with the kernel)
                            OR
            kminstall -d token4 (complete removal of the driver) 
   
    b)Static loading
       --------------

     For loading the driver statically run the following commands in the bin directory,

         1. kminstall -d token4
         2. kminstall -a token4
         3. kmsystem -c Y -l N token4
         4. config -u /stand/system
         5. kmupdate /stand/build/vmunix_test
         6. reboot
         7. Assign the IP using ifconfig command after the system reboots

     For unloading the driver statically run the following commands in the bin directory,
 
         1. Bring the interface down with ifconfig command.
         2. kminstall -d token4
         3. config -u /stand/system
         4. reboot 

4. Removal of package
---------------------

  Run unconfigure script which will remove the additional configured items for
  the driver.

**** End of readme.txt ***************************************************